单词bending moment
un.: 弯矩；弯曲力矩；挠矩
挠矩
弯曲力矩
弯矩
The pile bending moment along the tunnel axis is fairly large in value and complicated in distribution, especially for the long pile.
桩体沿隧道轴线方向的弯矩数值较大且分布曲折，长桩尤为明显；
The loading device applies torque loading to the rotating shaft, and a gravity bending moment is loaded by the small pulleys.
本发明对转轴施加扭矩加载，重力弯矩由小滑轮轴负担。
So, special attention should be paid to the strength of the riser for the section where the biggest deformation and bending moment is.
在横向位移和弯曲应力最大位置，应特别注意隔水管的强度问题。
Results illustrate that the lateral displacement and bending moment of the wellhead increased nearly linear with the mean drifting offset.
随着钻井船漂移量的增加，井口的横向位移和弯矩近似线性增加；
The Settlement both vertically and horizontally under lateral loads and bending moment must not exceed predetermined and acceptable values.
垂直和水平向荷载作用下的沉降和弯（曲）矩不能超过预先确定数值或工程采用的限定数值。
The peak values of the bending moment and its variations differ depending on the combination of vertical and horizontal loads.
对于组合加载与水平纵向加载，弯矩的极值、沿桩身的变化趋势和受荷载的影响范围不同。
The spanwise distribution of lift for minimum induced drag of wings having a given lift and a given bending moment.
分布展升降机最低诱导阻力的机翼有鉴于一部升降机和弯曲某一特定时刻。
Maintaining to be constant, the maximum bending moment of the pile increases linearly with increase of the undrained shear strength .
在不变的情况下，桩身弯矩随着增加呈线性增长。
In a simple supported beam the maximum bending moment occurs at the center, diminishing to zero at the ends.
在一座简支梁上最大弯矩是在中部产生，在两端减少为零。
And for the frame beam end bending moment amplitude modulation factor seems embodiment its value in practice projects.
框架梁端的弯矩调幅系数的合理取值的价值在实际工程中似乎更能体现出来。